News & Media


Keeping vehicles on the road and not unnecessarily in the workshop is key to a successful operation.  That’s why, when developing its braking systems, BPW has invested heavily.  The result is high-performance, low-maintenance equipment designed to keep downtime to an absolute minimum and customers’ vehicles on the road for longer.  


KEY CONSIDERATIONS FOR OPTIMAL PERFORMANCE: Trailer and tractor compatibility, as well as a vehicle’s working environment, are critical factors to performance and should be considered when selecting the brake for your operation.  But remember, if you’re debating whether to go drum or disc, there is no clear, black-and-white answer.  Everyone has an opinion.  We’ve highlighted some key points so you are better informed when making that decision.


COST:  Cost is a major factor when buying and in most cases it is one of the first considerations in deciding whether to fit BPW drum or disc brakes.  As well as the purchase price, you should consider the cost of replacement parts, maintenance costs, and labour time, i.e., long-term cost effectiveness.    


While a disc brake has fewer replaceable components than a drum brake, the initial cost of purchasing a disc brake set-up is, on average, higher. The long-term advantage is that with modular components, there is less to replace, therefore servicing time is reduced.  The cost of replacing modular parts for a disc brake is much higher when compared with a drum equivalent, with the caliper and disc accounting for the large majority of the cost.


When comparing standard BPW servicing and maintenance times for replacing equivalent components, the difference is negligible, and, of course, the standard times are just a guide.  Experience would be the deciding factor when comparing the labour time to change components.


As a result of the higher cost of disc brake components, the drum brake residual value is deemed higher, particularly when fitted with BPW axles.  At the end of the trailer’s useful life, the owner may wish to sell it, and with the market favouring drum brakes, this will be easier.  Another purchasing consideration when buying used trailers is the cost to renew components that have had a long service life, and, as mentioned previously, drum brake components cost less to replace.


OPERATIONALLY:  Choosing the right brake is dependent on the day-to-day operation of the trailer.  The BPW disc brake has better braking efficiency at higher temperatures and is less likely to be subjected to brake fade issues.  This is because as the disc increases in temperature, it expands toward the pads.  When the drum becomes excessively hot, it expands away from the shoes and on rare occasions, can expand to the point where, no matter how far you press the brake pedal, the shoe will not make good enough contact with the drum to stop the vehicle in time.  However, with the fitment of retarders / exhaust brakes, this issue is very rare in the UK.


The disc brake set-up is fairly exposed to the elements, and dirt, grime, and water ingress from the road surface will have a bearing on braking efficiency and the maintenance intervals required.  If a disc brake is used on muddy roads or tracks, the vent holes on the disc rotor can become blocked, causing the disc to become hotter much quicker and for longer periods of time.  BPW drum brakes, on the other hand, are better protected from outside elements, blocking the majority of moisture and dirt, which is why they are a preferable choice when it comes to certain applications such as forestry and site work.


If a trailer is part of a rental fleet and is underutilised, it’s not uncommon for the brake disc to become rusty.  This is because a trailer can be stored for periods waiting to be leased, therefore, out-of-use maintenance is required to ensure the integrity of the disc and pads are not compromised, whereas for drums this is not an issue.  Also, when leasing trailers, the make and model of the towing vehicle will vary, and discs are more sensitive than drums when it comes to the issue of trailer and tractor combinations.


Most modern tractor units have Coupling Force Control (CFC) integrated into the EBS system.  This is designed to give the optimum braking performance and compatibility between the tractor and trailer.  From our experience and research, the CFC tends to be more sensitive, and in some cases, the trailer was found to take on more of the braking load than the tractor unit.  This can result in the brakes running hotter and the discs and pads wearing out more quickly. The drum brakes’ operating temperatures are also considerably lower, and this results in less thermal loading upon adjacent components such as tyres, camshafts, hubs, and hub bearings.


MAINTENANCE COMPARISON:  Brake shoes are sometimes sent for relining at the end of their lining life, which can bring down the cost of replacing the friction material in brakes.  A disadvantage of sending the shoes away is that you may not receive the same shoes back.  It is advisable to mark your own shoes so you know the ones you send are the ones returned, not someone else’s heavily aged shoe with no prior knowledge of its historical workload.  Increasingly, operators fit new shoes with long-term operational reliability and economy for continued safety and longevity.


The new BPW ECO Disc is the further development of Europe’s most successful trailer disc brake.  The unique Offset Tappet Design ensures that the forces and moments on the brake pad are perfectly balanced - for even brake wear, long service life for brake pads and therefore lower operational costs.


PATENTED HUB TECHNOLOGY: Both drum and disc brakes benefit from the BPW patented hub technology, inspired by the efficiency of Formula 1 pit stops.  This simplifies maintenance procedures for both types of brakes, ensuring that the running gear system performs reliably and for longer.  For disc brakes, the ECO hub principle allows the disc to be removed without removing the caliper, saving time, with no additional greasing being required.  For drum brakes, it is necessary to grease both the camshaft and a slack adjuster.  Not only that but the entire wheel and hub, including the brake drum and bearings can be easily removed.  These features result in easier service and repair, shorter servicing times, reduced maintenance costs, and minimised downtime for both brake systems.




21 June 2024


For further press information, contact Rebecca Wesley or Emma Makings-Hone at BPW Limited:

Telephone: 0116 281 6100 | Email: [email protected] |  

[email protected]